Views:17 Author:Site Editor Publish Time: 2020-04-22 Origin:Site
It is used for smoothing, hollowing up, grinding , carving, shaping , milling, removing, cutting and deburring.
Gold, Platinum & Silver
It is used for shaping, concave progressing and digging on the work piece. It is widely used in the carving of wood and metal.
Pointed carbide burs easily reach hard areas and sharp-edged contours. It is suitable for trimming edges and contours.
It can be V-cut and back machined.
Ideal for rounded edges and surface finishes.
The burr is usually related to taper forming.
This burr is widely used for contour machining and right-angle corners.
Oval burrs can be used for cleaning, removing heavy chips, milling and producing long chips.
This Tungsten carbide burr produce a soft concave profile or a notch V with a soft radius.
The countersink carbide burrs are good at chamferring, beveling, counterboring, and reaching the areas with an acute angle.
|Diameter of Burr||RPM|
|1.6mm or 1/16"||25,000 - 35,000|
|2.35mm or 3/32"||17,000 - 26,000|
|3mm or 1/8"||17,000 - 26,000|
|6mm or 1/4"||11,000 - 16,500|
|12mm or 1/2"||8,000 - 12,000|
|16mm or 5/8"||7,650 - 11,500|
Longer service life
Use for long production runs
Heavy duty removal
Good for processing on hard and tough materials
Do not make the carbide burr being still for too long Keep
Please have the carbide burr in running, cause the carbide burrs left in silence for a long time will be hold back from hollowing and plunging into the materials and finally leads to roughness and scar. To better understand the carbide bur uses, to make good use of your router bits.