 |
Spray drying technology is used to protect the material under the condition that high purity nitrogen is completely sealed.
High purity，effectively reduce the possibility of oxygen increase during the preparation of the mixture
| Quantity: | |
|---|---|
KONETOOL hard alloy belts are widely used in woodworking, papermaking and stone processing.
We choose tungsten carbide raw materials with a purity greater than 99.95%, with very little impurity content, and the physical properties of the board are more stable.
Spray drying technology is used to protect the material under the condition that high purity nitrogen is completely sealed. It can effectively reduce the possibility of oxygen increase during the preparation of the mixture, and the purity is higher, and it is not easy to become dirty.
NO. | COMMON SIZES(MM) | NOTE |
1 | 440x28x2.7mm | Can be customized according to customer drawings or samples |
2 | 590x28x2.7mm | |
3 | 1150x28x2.7mm | |
4 | 1200x28x2.7mm | |
5 | 1300x28x2.7mm | |
6 | 1400x28x2.7mm | |
7 | 1500x28x2.7mm | |
8 | 1600x28x2.7mm |
The board density is uniform: the 300mpa isostatic press is used for pressing, which effectively eliminates the indentation, and the slab density is more uniform.
The board has excellent compactness, excellent strength and hardness indicators. The use of marine low-pressure sintering technology can effectively eliminate the pores in the plate and the quality is more stable.
The use of low temperature processing technology can improve the internal metallographic structure of the plate, and can also greatly eliminate internal stress and avoid cracks during the cutting process of the plate.
The advantages of our cemented carbide cutting boards are smooth, fast cutting speed and long service life.
Good weldability, high hardness, good wear resistance, mainly used for processing solid wood, density board, gray cast iron, non-ferrous metal materials, chilled cast iron, quenched steel, PCB, brake materials.
