Quantity: | |
---|---|
Carbide tipped multi-ripping Saw blades, without rakers and without anti-kickback, for ripping of soft, hard, wet and dry wood. Indicated for hard jobs and on thick boards. The tooth geometry is flat with positive cutting angle. left and right teeth design makes cutting sharper and smoother. Anti-rusted surface treating refuses any glue and saw dust. The rakers keep preventing the wood contact with saw boty otherwise increasing much friction. High grade saw body provides stable cutting performance and good heat-resistance. The plastic retainer prevents teeth of circular saw blades from being damaged during movement.The antikickback tooth makes possible a regular cut without kickback from loose knots.These blades are usually used on table sawing machines and automatic multiripping machines, with one or two spindles.
1. Applicable use: Longitudinal cutting of square and round wood.
2. Applicable equipment: multi-chip saw, splitter
3. Applicable tooth profile: flat tooth, cross helical tooth,antikickback tooth
4. Applicable processing materials: solid wood, softwood, hardwood, freshly cut wood, wet wood
D | d | B | Z | KW*2 |
150 | 45 | 2.2/1.7 | 24+3 | 4*8 |
160 | 50 | 2.5/2.0 | 24+3 | 5*10 |
180 | 50 | 2.5/2.0 | 24+3 | 5*10 |
205 | 50 | 2.5/2.0 | 30+3 | 5*10 |
230 | 40 | 2.2/1.7 | 30+3 | 6*12 |
230 | 40 | 2.5/2.0 | 30+3 | 5*10 |
230 | 45 | 2.2/1.7 | 30+3 | 4*8 |
230 | 50 | 2.5/2.0 | 30+3 | 5*10 |
255 | 50 | 2.5/2.0 | 30+4 | 5*10 |
305 | 50 | 3.0/2.4 | 36+4 | 5*10 |
305 | 70 | 3.0/2.4 | 36+4 | 7*21 |
355 | 60 | 3.2/2.5 | 36+4 | 7*14 |
405 | 60 | 3.4/2.7 | 36+6 | 6*12 |
Home | Carbide Products | Company Profile | FAQ | Technical Support | News | Contact Us