News Details

You are here: Home » News » Carbide Burrs » Teach you how to choose hard alloy tungsten carbide burrs from 4 aspects

Teach you how to choose hard alloy tungsten carbide burrs from 4 aspects

Views:0     Author:Site Editor     Publish Time: 2020-08-11      Origin:Site


Introduction


Nowadays, hard alloy carbide burrs are gradually becoming more and more popular in industrial production. They can improve our labor efficiency and we have much more time to use it. In that way, if you have some need for it or you might want to know about it. Is there anything you need to pay attention to when buying? four aspects teach you how to choose it are as follows.


carbide burrs


Choice of teeth


In the fist place, if you are choosing the teeth , you must pay attention to the margin, accuracy of products to be processed, characteristics and properties of materials. For example, you are supposed to make use of smooth tooth to fabrication workpiece with small surplus, high requirements on size, high surface finish. What’s more, It have higher requirements for product fineness.


Choice of size


In the second place, when it comes to the specification, you should base on the size of the workpiece to be machined, in addition, of course, we should also pay attention to the surplus of processed products. You have to deal with small sizes and residuals, and you have to choose small pieces.Conversely, when meet bulky size, you should use large artifacts.


Choice of tooth pattern


In the third place, in the selection of tooth shape, you are supposed to depend on the nature of the materical to be processed. For instance, using a thick teeth to treat soft materical and which can be easily processed. The close tooth is suitable for finishing products or which requires a higher degree of surface finish.


Section shape


In the last place, be sure to select the fitted shape. The rasper with end cut is fit for single face, the rasper without end cut is fit for double-faced, cylinder with round head or ball nose is fit for the two sides and corners of a right Angle.


carbide burrs


Conclusion


In recent years, they have become more and more common in our daily life and factory production. What is more, it will also become you most helpful assistant. If you have any needs, please feel free to contact us by phone or email,We are a company specializing in the customization and development of cemented carbide special-shaped parts and non-standard parts.


Kone Carbide Tool Co., Ltd.
 
E-mail:   Click to show the Email
 
Tel:  +86-28-61716272
 
Mobile: +86 13648013796

Add:  No. 777 Haike Road Cross-Strait Industrial Park Wenjiang, Chengdu,610000,P.R.China
We use cookies to enable all functionalities for the best performance during your visit and to improve our services by giving us some insight into how the website is being used. Continued use of our website without having changed your browser settings confirms your acceptance of these cookies. For details please see our cookies
×